model no. 054-0338-0 | contact us 1-888-670-6682
18
WET V
A
CUUM OPER
A
TION
Verify that the power cord is
disconnected from the outlet.
Make sure that the collection tank
is clean and free of dust and dirt.
Push the required attachment
onto the free end of the hose
or extension wand. To use the
round dust brush and crevice
tool with an extension wand you
will be required to use the metal
accessory adaptor.
Remove all dry use filters. Carefully
install the foam wet filter over
the filter cage and place power
head back on the collection tank.
For foam wet filter installation
instructions, see page 22.
1
3
2
WET VACUUMING
WARNING:
Be sure to read, understand, and apply information stated in “Safety Guidelines”. Do not
vacuum in areas with flammable gases, vapours, or explosive dusts in the air. Flammable
gases or vapours include but are not limited to: lighter fluid, solvent type cleaners, oil-
based paints, gasoline, alcohol, or aerosol sprays. Explosive dusts include but are not
limited to: coal, magnesium, grain, or gun powder. To reduce the risk of health hazards
from vapors or dust, do not vacuum toxic materials.
WARNING:
Do not plug the power cord into a power outlet. Make sure the plug is disconnected before
changing the filters.
DO NOT USE THE HEPA CARTRIDGE FILTER AND THE MICROFIBRE PRE-
FILTER FOR VACUUMING LIQUIDS.
OPERATING INSTRUCTIONS: WET VACUUMING
Summary of Contents for 054-0338-0
Page 1: ...30 L 8 U S Gallons HEPA Wet Dry Vacuum 054 0338 0 ...
Page 2: ......
