Maximum 054-0291-8, Instruction Manual

Page: 23 / 31

23
EMPTYING AND CLEANING THE COLLECTION TANK
WARNING!
To reduce the risk of injury, always unplug the charger and
remove the battery pack from the charger or tool before
performing any maintenance. Never disassemble the tool,
battery pack or charger.
IMPORTANT:
Before cleaning your vacuum or carrying out any
maintenance, make sure that the tool is switched off and power
supply is disconnected to prevent accidental start-up.
Verify that the battery has been
removed from the operational battery
bay.
Undo the latches and remove the power
head from the collection tank. Clear all
dirt or debris from the collection tank
and clean with mild soap and water.
Allow to dry before replacing the power
head.
STORAGE
Before storing your vacuum cleaner, the collection tank should be emptied and
cleaned. The battery should be stored in the right storage bay. The accessories should
be cleaned and stored so they can be readily available when needed. Store wet/dry
vacuum indoors.
REPAIRS
Repairs for this wet/dry vacuum should be performed only by qualified service
personnel using only identical replacement parts.
Disconnect the hose from the
vacuum.
1
3
2
MAINTENANCE