Spangenberg International B.V.
– Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
First Time Use
•
Unpack and inspect your machine immediately after receipt. If there are any latent defects or damage to
the machine then immediately contact your dealer. Save all packaging materials in case the machine needs
to be returned or for inspection by the freight carrier.
•
Remove any protective film from all surfaces.
•
Read this instruction manual completely before attempting to install and operate this product. All
installations and set ups must be done by authorized service agents, your dealer, or Maxima
representatives.
•
The machine must be positioned on a flat surface with sufficient space around the machine to allow for easy
access, cleaning and proper ventilation.
•
Level and position the machine in such a way that the plug is accessible at all times.
•
If your machine is supplied with a factory fitted molded plug then you may plug the unit into a standard
electrical outlet. Make sure that the voltage of the machine and the wall outlet are compatible. If your
machine is not supplied with a factory fitted molded plug then a qualified electrical technician must be
contracted to wire the unit to the power supply.
•
Before using your machine for the first time it is recommended that the exterior of the machine is wiped
down with a damp cloth, and the worksurfaces, attachments or attributes are cleaned using a food safe
cleaning detergent and rinsed with warm water. After cleaning, wait for appliance to dry completely.
M-ICE Series Accessories
