Maxima 09500200 User Manual Download Page 8

 

 

 

Spangenberg International B.V. 

– Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445 

[email protected]

 - 

www.maximaholland.com

 

 
 

When using Vacuum Containers 

 
1.

 

Only use containers which are intended for vacuum packaging. 

2.

 

Place your product inside the container. Do not fill the container completely, leave some space between the 
product and the lid. 

3.

 

Place the lid on the container (ensure the lid is undamaged, clean and dry) and turn de valve into the 

“Vacuum” position.

 

4.

 

Attach the vacuum hose to the valve on the lid and attach the opposite end of the hose to the hose 
connection at the side of the appliance. 

5.

 

Press the 

Canister/ MarinateX2

” 

key to start the vacuum process.  When using the vacuum canister 

function, you cannot adjust the seal time or vacuum time. The vacuum pump will work until a pre-
programmed low pressure is reached and stops operation automatically afterwards.  

6.

 

When the vacuum process is complete, turn the valve in

to the “Lock” position and remove the hose. Store 

the container in the refrigerator. Do not store in freezer, this will cause vacuum loss over time. 

7.

 

To open the container turn the valve to the 

“Open” position and remove the lid.

 

 
NOTE: Vacuum hose or container are not included, contact your supplier to aquire these accessories. 
 
 

How to use marinate function 

 
The Maxima Vacuum Sealer 310mm DS has a special marinating feature that allows food to achieve maximum 
flavour infusion in the least amount of time. 
 
1.

 

Place your product and marinade together in a container. Do not fill the container completely, leave some 
space between the product and the lid. 

2.

 

Place the lid on the container (make sure the lid is undamaged, clean and dry) and turn de valve into the 

“Open” position.

 

3.

 

Attach the vacuum hose to the valve and attach the opposite end of the hose to the hose port on the side of 
the appliance. 

4.

 

Press 

the “

Canister/ MarinateX2

 key twice to activate. The machine will now alternate between vacuum 

and releasing air. 

 
NOTE: This feature only works when using vacuum containers. 
 
 
 

 

Summary of Contents for 09500200



















Reviews: