MAXIDRY MAXI200, Installation Manual, Page: 63 / 78

113261 - 1 59
SECTION VI
ROUTINE MAINTENANCE
A. CLEANING
A program and/or schedule should be established for periodic inspection, cleaning, and removal of lint from various
areas of the dryer, as well as throughout the ductwork system. The frequency of cleaning can best be determined from
experience at each location. Maximum operating efficiency is dependant upon proper air circulation. The accumulation
of lint can restrict this airflow. If the guidelines in this section are met, the dryer will provide many years of efficient,
trouble free, and most importantly safe operation.
WARNING: LINT FROM MOST FABRICS IS HIGHLY COMBUSTIBLE
.
THE
ACCUMULATION OF LINT CAN CREATE A POTENTIAL FIRE HAZARD
.
WARNING: KEEP DRYER AREA CLEAN AND FREE FROM COMBUSTIBLE
MATERIALS, GASOLINE AND OTHER FLAMMABLE VAPORS AND
LIQUIDS
.
NOTE: Suggested time intervals shown are for average usage, which is considered six (6) to eight (8)
operational (running) hours a day.
IMPORTANT:
Dryer produces combustible lint and
must be
exhausted to the outdoors. Every 6
months, inspect the exhaust ducting and remove any lint build up.
CLEANING SCHEDULE
EVERY THIRD OR FOURTH LOAD
Clean the lint basket. A clogged lint basket will cause poor dryer performance. The lint basket is located in the lint
drawer in the base of the dryer. Pull out the lint drawer, brush the lint off the basket, and remove the lint. Inspect lint
screen and replace if torn.
NOTE: Frequency can best be determined at each location.
WEEKLY
Open the hinged panels on each side of the tumbler section and remove any lint accumulation from the tumbler drive
motor, drive shafts, gear reducer, V-belts, drive wheels, and drive shaft bearings.
Slide the lint basket ALL the way out of the dryer and clean any lint accumulation off of the temperature sensor
bracket, which is located above the lint basket.
WARNING: TO AVOID THE HAZARD OF ELECTRICAL SHOCK, DISCONTINUE
ELECTRICAL SUPPLY TO THE DRYER .