manualshive.com logo in svg

Maxi-Cosi Moda, User Manual

Share
Download
Maxi-Cosi Moda User Manual Download Page 31

Moda 

I

 Convertible Car Seat 

I

 

Maxi-Cosi

 

I

 

31

Attach the top tether strap to the top anchorage point 
in the vehicle.

Ensure there are no twists in the belt, and adjust until all 
slack is removed from top tether.

Start with the strap on the inside closest to the centre 
and remove as much slack out as possible.

Feed the free end of ISOGO strap through the side trim 
opening.

Firmly push child restraint down into the vehicle seat 
whilst pulling on the ISOGO straps.

Alternate removing the slack from side to side until you 
get a firm fitment and achieve a 

GREEN

 indication. 

Ensure to pull the free end of the ISOGO strap out after 
tightening complete.

Installation

Do not attach the lower attachment connectors of two separate child restraints to 
the same ISOFIX low anchorages in your car.
Always attach the top tether strap to the child restraint upper anchorage in your 
car. Refer to your owner’s manual.
Child restraint lower attachment connectors and the ISOFIX low anchorages in 
your car are designed to withstand only those loads imposed by a correctly fitted 
child restraint. 

IMPORTANT:

REMOVE

FEED 

THROUGH

3. Tighten the connector straps

4. Attach top tether strap

PUSH

PULL 

STRAP

Front of vehicle

NOTE:

 

Always check for

 

GREEN

 

at eye level.

Summary of Contents for Moda









































Reviews:

No comments

Brands by name

Popular brands

Load more brands