manualshive.com logo in svg

Maxi-Cosi Moda, User Manual

Share
Download
Maxi-Cosi Moda User Manual Download Page 28

28 

I

 

Moda 

I

 Convertible Car Seat 

I

 

Maxi-Cosi

 

Installation

Rearward-facing installation with vehicle belts

1. Start by loosening full length of the top tether.

2. Set base in position 3 (High).

3. Swing stabilising arm into position.

4. Place restraint facing rearwards on back seat of 
vehicle in line with a top tether strap anchorage point.

5. Thread the vehicle seat belt through the 

BLUE

 belt 

path at the bottom of the restraint and fasten buckle.

6. Press the child restraint firmly down into the vehicle 
seat and remove belt slack. 

7. Attach the top tether strap to the anchorage point. 
Adjust until all the slack is removed. Ensure Base of 
seat is not lifted.

NOTE: 

There is an option to install seat using seat belt with accessory locking clip. 

Please see instructions provided with locking clip for installation.

WARNING

•  DO NOT LEAVE CHILDREN UNATTENDED IN THE VEHICLE.

CLICK

SWING UP

PUSH

HIGH

PUSH

NOTE:

 These images are for reference and illustration purposes only. 

We recommend 

the use of the provided stabilising bar cover and the seat mat when installing 

this product (if fitted).

Summary of Contents for Moda









































Reviews:

No comments

Brands by name

Popular brands

Load more brands