manualshive.com logo in svg

Maxi-Cosi Moda, User Manual

Share
Download
Maxi-Cosi Moda User Manual Download Page 24

24 

I

 

Moda 

I

 Convertible Car Seat 

I

 

Maxi-Cosi

 

You MUST make these adjustments with your child before you install the child 
restraint in the vehicle. Please adjust harness according to the infant’s shoulder 
height prior to installation.

1.  Lift the harness release lever at the front of seat.

2.  Pull the shoulder strap to loosen. 

3.  Press red button to release buckle assembly 

for ease of child fitment. Pull harness straps over 
sides of infant seat. Place child in seat.

Operation and adjustment

Preparing harness for child fitment

Configuring the harness straps for correct 
child fitment:

LIFT

PULL

IMPORTANT:

 

Always ensure that the harness adjuster is free from any 

obstructions to avoid harness straps loosening.

YES

NO

The shoulder straps must be in the slots which 
are nearest to the child’s shoulders, but not lower 
than the child’s shoulders.

(newborn to approximately 30 months)

REARWARD-FACING

25mm

YES

NO

The shoulder straps must be in the slots which 
are nearest to the child’s shoulders, but not more 
than 25 mm below the child’s shoulders.

(12 months to 4 years)

FORWARD-FACING

Summary of Contents for Moda









































Reviews:

No comments

Brands by name

Popular brands

Load more brands