Maxi-Cosi EasyBase 2, Instructions For Use & Warranty

Page: 8 / 98

EN
English
Checklist …
To ensure the optimum safety of your child, check the following after installation:
• The seat belt is as tight as possible and not twisted.
• The two belt parts pass through the belt openings in the base and under the blue belt clamp.
• The support leg is fully folded out.
• The indicator on the base of the support leg is green.
• The entire Maxi-Cosi EasyBase 2 is installed securely and firmly in the car (check by pulling on the
Maxi-Cosi EasyBase 2).
C. Removing the Maxi-Cosi EasyBase 2
• Restore the support leg to its start position by pressing the control button (8,1) and sliding the support
leg upwards (8,2).
• Loosen the seat belt (9,1) and open the blue belt clamp (9,2).
• Take the seat belt out from between the base and the blue belt clamp (10,1) and fasten the belt
clamp (10,2).
• Remove the Maxi-Cosi EasyBase 2 from the car.
4. INSTALLING AND REMOVING THE MAXI-COSI CABRIOFIX/PEBBLE
A. Installing the Maxi-Cosi CabrioFix/Pebble
• Position the Maxi-Cosi CabrioFix/Pebble facing backwards (with the back facing the direction of driving)
on top of the Maxi-Cosi EasyBase 2 (11). The carrying handle should be in the upright position.
• Click the Maxi-Cosi CabrioFix/Pebble with its two spindles onto the anchor points of the Maxi-Cosi
EasyBase 2 (12).
•
NOTE!
A clear click should be audible and the indicators should now be completely on
green
(13).
• NOTE! Under no circumstances should this product be used if the indicator remains on red. Carry out
the above actions again. In case of doubt or if you have any questions, contact the manufacturer.
• Check that Maxi-Cosi CabrioFix/Pebble has been installed correctly by pulling on it.
8
9
10
11
12
13
10