Page 3 of 10
ARF U-control Profile
S141208
3.
Returned merchandise that is accepted by Maxford USA for credit is subject to a 10% to 20%
restocking fee (the final amount will be determined by Maxford USA upon receipt and
examination of the returned merchandise).
Return Address:
Maxford USA RC Model Distribution, Inc.
15939 Illinois Avenue #C
Paramount, CA 90723
IMPORTANT: Print the RMA# issued by Maxford USA on the package near the above address.
III. SPECIFICATIONS:
Wingspan ............................................................................................................................................ 52-inches
Wing Area ........... 637 sq. inches without flaps; 790 sq. inches when the included optional flaps are installed
Length ................................................................................................................................................. 40 inches
ARF weight ................................................................................................................... 2 pounds and 9 ounces
Engine (Not included) .................................................... 40-class (approx. .32 to .52 cubic inch) glow engine
or equivalent electric power system
Propeller (Not included) ........................ 10x6 (or as recommended for your engine or electric power system)
Control lines (Not included) ................................................... 52 feet (15.85 meters) or 60 feet (18.29 meters)
(All dimensions and weights are approximate.)
IV. SPECIAL FEATURES OF THE P-47 & P-51 PROFILE:
Preinstalled bellcrank and leadouts.
Hatch in the bottom of each wing panel for
access to control system components.
The hardwood engine-mounts may be drilled
to fit most popular engines.
The fuselage, wings and empennage are laser-
cut, jig-assembled balsa and light plywood.
All airframe assemblies are prefinished with
Mylar covering material.
Flaps are included and may be optionally
installed by customer.
Steerable tail wheel.
Customer’s choice to operate with a glow- or
electric-power system.
V. PARTS LIST:
1. Items you must supply to complete this
P
ROFILE
P-47/-51
ARF U-Control airplane.
Epoxy glue, cyanoacrylate (CA) adhesive,
masking tape, a drill or high-speed rotary tool,
and a few common hand tools (such as long-
nosed and diagonal or side-cutter pliers, etc.).
.32- to .52-sized glow engine or equivalent
electric power system.
10x6 propeller or as recommended for your
power system.
*
*
Pictured with an optional electric power system
