/
II. WARRANTY, LIABILITY WAIVER & RETURN POLICY:
Maxford USA guarantees this kit to be free from defects in material and workmanship at the time of purchase.
All our products have been inspected in our factory and are checked again when shipped from our warehouse.
However, Maxford USA cannot directly control the materials you may use nor your final assembly process.
Therefore, Maxford USA can NOT in any way guarantee the performance of your finished model airplane.
Furthermore, in purchasing this product, you (the buyer or user of this product) exempt, waive, and relieve
Maxford USA from all current or future liability for any personal injury, property damage, or wrongful death,
and if you (the buyer or user of this product) are involved in any claim or suit, you will not sue Maxford USA
or any of its representatives.
If you do not fully accept the above liability and waiver, you may request a return-merchandise authorization
number (RMA#) as explained below in item 2. If you think there is a missing, damaged or unsatisfactory part,
please read our after-sales service and return policy:
1.
Inspect your order upon delivery for any missing, damaged or unsatisfactory part(s). If you believe there is
a problem, you must call us at 562-529-3988 (Monday through Friday except holidays, between the hours
of 9 AM and 5 PM Pacific time) before you begin assembly and within 10 days from receipt of your
purchase. During this telephone conversation, and with your support, we will determine how to resolve
your concern.
2.
To request a return-merchandise authorization number (RMA#), call 562-529-3988 (Monday through
Friday except holidays, between the hours of 9 AM to 5 PM Pacific time). If we elect to issue you an
RMA#, you must clearly mark this RMA# on the outside of the package. (No return or exchange will be
authorized after 10 days from the date of your receipt of the product; any package delivered to us without a
Maxford USA RMA# is subject to being returned to the sender, as received, with return postage payable
upon delivery.) Returned merchandise must be in its original condition as received from Maxford USA,
with no assembly or modification, in the product’s original packing materials, complete with all manuals
and accessories. Return shipping and insurance charges must be prepaid by you, the buyer.
3.
Returned merchandise that is accepted by Maxford USA for credit is subject to a 10% to 20% restocking
fee (the final amount will be determined by Maxford USA upon receipt and examination of the returned
merchandise). Return address:
Maxford USA
15939 Illinois Avenue, #B-C
Paramount, CA 90723
IMPORTANT: Print the RMA# issued by Maxford USA near the above address.
III. PARTS LIST:
1.
Included items
Realistic-looking dummy engine and
Townend Ring.
Windshield (with mounting screws).
Wing struts and simulated wing wires.
Prebuilt and precovered horizontal stabilizer,
elevator, vertical stabilizer & rudder.
Stearable tail gear.
Scale-looking fiberglass wheel pants.
Complete set of scale stick-on markings.
Hardware package.
All-wood built-up fuselage, precovered with
iron-on Mylar film.
This illustrated Instruction Manual
2.
Items you must supply
5-minute epoxy and thin cyanoacrylate (CA) adhesives, threadlock compound.
Low-tack masking tape and common hand tools (such as screwdrivers and long-nosed pliers).
A four- (or more) channel radio system with 4 ea. mini servos, 2 ea. 12-inch servo extensions and 1 ea.
6-inch Y cable.
Electric power system (with 400 to 600 Watt motor and compatible electronic speed control).
11 or 12 inch diameter by 6 or 7 inch pitch propeller (or as recommended by the maker of your motor).
Page 3 of 12
S121029 Copyright 2012