![Maxent ML-3731HLT Owner'S Manual Download Page 35](http://html1.mh-extra.com/html/maxent/ml-3731hlt/ml-3731hlt_owners-manual_1743646035.webp)
35
Troubleshooting Problems With Your TV
FILE LOCATION:
E:\workarea\customer\MAXNET\061101_ML-3731Manual-revisions\ch5e.fm
DELL CONFIDENTIAL
–
PRELIMINARY 12/6/06
–
FOR PROOF ONLY
TV Menu Messages
While using your TV, the following messages may appear.
Remote Control Problems
Message
Possible Solution
Auto Adjust
No action required, the TV is performing an auto adjustment.
Out of Range
Check the resoluton settings on your PC to a standard VESA
supported resolution of 1024x768.
No Video Input
1
Check all cables are properly connected.
2
Ensure the proper source is selected. See "Input Select" on
page 26 for more information.
TV Buttons Locked
To unlock, press Menu on your remote control, select Setup.
In Power Save Mode
Press any key on keyboard
or move mouse
If you have a computer connected to the TV display and there
is no signal detected, the TV display goes in to sleep mode.
The power light is amber when the TV display is in sleep mode.
Self Test
Appears for computer source when there is nothing plugged in.
Select VGA from Input Select menu and nothing is plugged in.
Plug a computer in to the VGA connector.
Problem
Possible Solution
The TV does not respond when
using the remote control
1
Point the remote control directly at the lower right corner of the
TV display. Be sure that nothing is blocking the front of the TV
display. For the location of the IR, see "Front View" on page 5.
2
Press the TV button on the remote control to set the remote to
function for TV instead of other devices available on the
Univeral Remote.
3
Verify that the batteries are properly installed.
4
If the batteries are old, install new batteries.
NOTE:
Bright lights or other infrared devices may interfere
with your remote control and IR on the TV display.
Summary of Contents for ML-3731HLT
Page 40: ...7 7 3 0 1 1 4 2 1 6 P0 A...