Troubleshooting Problems With Your TV
32
FILE LOCATION:
E:\workarea\customer\MAXNET\061101_ML-3731Manual-revisions\ch5e.fm
DELL CONFIDENTIAL
–
PRELIMINARY 12/6/06
–
FOR PROOF ONLY
Poor picture quality when using a
device connected to the TV
connector
1
Ensure TV display is selected as the input source in the Input
Source menu. See "Input Select" on page 26 for more
information.
2
Press Menu on the remote control, select Setup, and then
select Channel Setup. This resets the channels on your TV.
3
Check the aspect ratio settings in the OSD Menu. Press the
Menu button on the remote control and select Size.
4
Reset the original factory defaults. Press Menu on the remote
control, select Setup, and then select Factory Reset.
5
Adjust the color temperature. Press Menu on the remote
control, select Picture, and then select Color Temperature.
6
The problem may be with your device, contact your service
provider.
7
Caused by displaying a low resolution NTSC (analog) TV
broadcast using a high-definition display. There is an inherit
limitation of NTSC TV; therefore, try to get HD content from
your cable or satellite service provider.
Nothing appears on my TV
1
Ensure the TV display is turned on.
2
Verify that all the cables are properly connected to the TV
display, including the power cable.
3
Check to see if there is a blue light on the lower, right- hand
corner of the TV display. A blue light indicates the TV display
is on.
4
Ensure the proper source is selected in the Input Source
menu. See "Input Select" on page 26 for more information.
5
Reconnect any devices that are currently connected to the TV
display. If you are using multiple devices, connect and test
one device at a time.
6
Connect another device that you know is working properly.
7
Reset the original factory defaults. Press Menu on the remote
control, select Setup, and then select Factory Reset.
I can
’
t get HD to display on my TV
1
You are not feeding the TV a high-definition signal. We
recommend that you upgrade your current home broadcast
service to HDTV standards. Please refer to page 1 of the
Quick Start Guide.
Problem
Possible Solution
Summary of Contents for ML-3731HLT
Page 40: ...7 7 3 0 1 1 4 2 1 6 P0 A...
