Maxell MP-WU9101B, User Manual

Page: 33 / 296

English-
31
Installation of the Projector
English-
31
Rear/Ceiling
Select REAR/CEILING in the OSD menu.
• EASY MENU → INSTALLATION → REAR/CEILING
•
ADVANCED MENU → SETUP → INSTALLATION → REAR/CEILING
Lotus
Correct Picture
+
Lotus
Adjusting the projector lens
Projector lens adjustment includes focus, zoom, horizontal/vertical picture shift, image corner adjust,
and Warping. Refer to " Page 21 : 7. Adjusting the projector's angle, Lens Shift, Zoom, Lens
Centering, and Focus " and " Page 22 : 8. Correcting the distortion " for detailed instructions.
NOTE:
• The information in this manual is subject to change without notice.
• The illustrations in this manual are for illustrative purposes. They may differ slightly from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent.
Trademark acknowledgment
• HDMI
TM
, the HDMI logo, and High-Defi nition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
• Blu-ray Disc
TM
and Blu-ray
TM
are trademarks of Blu-ray Disc Association.
• HDBaseT
TM
and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
• DLP
®
and the DLP logo are registered trademarks of Texas Instruments.
All other trademarks are the properties of their respective owners.
Warranty and after-service
If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using
the projector immediately. Then turn off the power, and contact the dealer or service company.
If a problem occurs with the projector, fi rst refer to “Troubleshooting”, and run through the suggested
checks.
If this does not resolve the problem, consult your dealer or service company. They will tell you what
warranty condition is applied.
Cooling fl uid needs to be checked 3 years after the purchase. Consult the dealer or service
company.