12
Turning off the power
1.
Press the
STANDBY/ON
button on the
projector or the
STANDBY
button on
the remote control.
The message “Power off?” will appear
on the screen for about 5 seconds.
2.
Press the
STANDBY/ON
or
STANDBY
button again while the message
appears.
The projector lamp will go off, and the
POWER
indicator will begin blinking in
orange. Then the
POWER
indicator will
stop blinking and light in steady orange
when the lamp cooling is complete.
3.
Attach the lens cover, after the
POWER
indicator turns to steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the
lamp.
WARNING
Ź'RQRWWRXFKDURXQGWKHODPSFRYHUDQGWKHH[KDXVWYHQWV
during use or just after use, since it is too hot.
Ź5HPRYHWKHSRZHUFRUGIRUFRPSOHWHVHSDUDWLRQ7KHSRZHURXWOHWVKRXOG
be close to the projector and easily accessible.
NOTE
• Please power off the projector after any connected devices are
powered off.
7KLVSURMHFWRUKDVWKH$87232:(52))IXQFWLRQWKDWFDQPDNHWKH
SURMHFWRUWXUQRIIDXWRPDWLFDOO\)RUPRUHLQIRUPDWLRQSOHDVHVHH
User’s
Manual - Operating Guide
. (
1
)
POWER
indicator
STANDBY
button
STANDBY/ON
button
