11
(1*/,6+
CAUTION
Ź,I\RXZLVKWRKDYHDEODQNVFUHHQZKLOHWKHSURMHFWRUVODPSLV
on, use the lens shade or AV MUTE function (see
User’s Manual - Operating
Guide
(
1
)). Taking any other action may cause the damage on the projector.
NOTE
• The
ASPECT
button does not work when no proper signal is inputted.
•
7KHUHPD\EHVRPHQRLVHDQGRUWKHVFUHHQPD\ÀLFNHUIRUDPRPHQWZKHQDQ
operation is made. This is not a malfunction.
)RUWKHGHWDLOVRIKRZWRDGMXVWWKHSLFWXUHSOHDVHVHH
User’s Manual -
Operating Guide
. (
1
)
VOL + / -
buttons
ASPECT
button
%XWWRQVIRULQSXWSRUWV
INPUT
button
FOCUS -
/
+
buttons
ZOOM
button
ZOOM +
/
-
buttons
FOCUS +
/
-
buttons
Displaying the picture
1.
Activate your signal source. Turn the signal
source on, and make it send the signal to the
projector.
2.
Press the
INPUT
button on the projector.
Each time you press the button, the projector
switches its input port in turn.
You can also use the remote control to select
an input signal. Press any of the buttons from
COMPUTER 1
/
2
,
LAN
,
USB TYPE A
/
B
,
HDMI
1
/
2
,
COMPONENT
,
S-VIDEO
or
VIDEO
to
select the input signal from each port.
3.
Use the
VOL + / -
buttons to adjust the volume.
The projector is not equipped with an internal
speaker. The audio is output from the external
audio system connected to the
AUDIO OUT
port.
4.
Press the
ASPECT
button on the remote control.
Each time you press the button, the projector
switches the mode for aspect ratio in turn.
5.
Use the
ZOOM + / -
buttons on the remote
control or
ZOOM
EXWWRQDQGŻŹFXUVRUEXWWRQV
on the projector to adjust the screen size.
6.
Use the
FOCUS + / -
buttons on the projector or
the remote control to focus the picture.
