MAXDATA PLATINUM 200 I, User Manual

Page: 15 / 37

14 15 MAXDATA PLATINUM 00 I M9 Hardware Installations and Upgrades 14 15 MAXDATA PLATINUM 00 I M9 Hardware Installations and Upgrades
. Slide the drive carrier out of the drive cage.
. Remove the four screws that secure the plastic retention device to the drive carrier. Remove
the plastic retention device.
Figure 8. Removing Plastic Retention Device
4. Secure the hard drive to the drive carrier using the four screws that were formerly attached to
the plastic retention device. Ensure that the connector end of the hard drive is facing the back
of the drive carrier. The label side of the hard drive should be facing up in the drive carrier.
Figure 9. Securing Hard Drive to Drive Cage
5. With the black lever open, insert the drive carrier into the drive cage. Once inserted, rotate the
black lever upwards to latch the drive carrier into position.
Figure 10. Inserting Drive Carrier into Drive Cage