ENGLISH
18
environment.
3.8
Activating the Auto Channel Scan
Channel scan perform searches for active signals in an endless loop for all 8 channels, 38
CTCSS codes and all 83 DCS codes.
a. Press the
MENU
button 5 times,
“SCAN”
icon will display on LCD Screen.
b. Press the
UP
or
DOWN
button to begin scanning channels when an active signal is
detected, channel scan pauses on the active channel.
c. Press the
MENU
button six times, CTCSS flashes on the LCD screen press the
UP
or
DOWN
button to begin scanning the CTCSS from 1-38.
d. Press the
MENU
button seven times, DCS flashes on the LCD screen. Press the
UP
or
DOWN
button to begin scanning DCS code 1-83.
e. Press the
PTT
button to confirm your setting.
3.9 Vibrator and Call alert
Your WT350 can alert you to incoming signal by emitting an audible call tone and vibration
signal.
4 Call-Ring tone
You can send a Call-ring tone to other PMR users to give an alert that you want to
communicate with them.
Press the CALL button
Yu will hear a ring tone for about two seconds; “
TX
” icon appears on the LCD Screen.
Any other units within the transmitting range and tuned to the same channel and
sub-channel (if applicable) will hear the Call-ring tone.
4.1 Selecting a Call- Ring tone
The WT350 is equipped with 15 different types of Call-Ring tones.
a. Press the
MENU
button 8 times, the “C 1” icon will display and blinking on the LCD
Screen.
b. Press the
UP
or
DOWN
button to select the desired Call-ring tone. A respective Call-
Ring tone sound will be played when changing from one tone to another.
c. Press the
PTT
button to confirm your setting.
4.2 Activating the Vibrator mode
a. Press the
MENU
button 9 times; “3” flashes on the LCD Screen.
b. Press the
UP
or
DOWN
button to activate the vibrator function.
c. Press the
PTT
button to confirm your setting.
Note: Vibrator and Call tone can be activated at the same.
