WEB SERVER
www.maxcessintl.com
DLCA NET-IP65-ECAT
MI 850A366 1
Page 39 of 44
8.0
Web server
Access the web server in the DLCA NET-IP65-ECAT
An Ethernet connection must be made to Ethernet Port 2 only.
The DLCA NET-IP65-ECAT must be disconnected from the
EtherCAT network and then power must be cycled.
The DLCA NET-IP65-ECAT will allow non-EtherCAT traffic on
Ethernet Port 2 after restarting as long as no EtherCAT traffic is
detected on either Ethernet port.
Open a browser and type into the address bar
This is the default IP Address for the DLCA NET-IP65. The IP
Address is not changeable for the DLCA NET-IP65-ECAT.
The DLCA NET-IP65-ECAT will show a web page similar to the
one in Figure 6. Navigate to other pages using the links in the
left menu area. The other pages will show parameters and have
links to allow editing parameters and performing calibrations.
The tension is displayed as a real number with the decimal
point position included from parameter 0x207 and 0x217.
Figure 6. Sample web server page
