Maxcess Fife GMA-BL, Quick Start Manual

Page: 6 / 16

2-2 FEATURES
www.maxcessintl.com Fife GMA-BL MI 2-264 1 B
The Control Panel can also be configured in a vertical orientation. For the vertical orientation,
the following display descriptions apply. Refer to Figure 2 for the button locations.
1. The horizontal section along the top, above the line, contains the status bar which always
contains the menu number. It may also indicate statuses, errors, and digital I/O.
2. The horizontal section near the top, just below the line, contains the Operation Mode
selection buttons (Automatic, Servo Center, and Manual) and indicates the current
Operation Mode selection by displaying that button in a green color.
3. The section just below the Operation Mode buttons, indicates the current Operation
Mode, the selected sensor signal level in a bar graph, and the level of Guide Point Shift.
This section also contains the Guide Point Shift buttons and the Guide Point Reset
button.
4. The section below that, just above the Sensor Select and Setup buttons, contains the Left
and Right Jog buttons.
5. The horizontal section along the bottom contains the Sensor Selection and Setup buttons
and indicates the current Sensor Mode selection by displaying the proper sensor symbol
in the Sensor Select button.
Figure 2.
CONTROL PANEL
(90° AND 270° ROTATION)