Hi-T2
Centralised controller
10
Figure 7. Chiller/heat pump.
Referring to the above figure, it is possible to obtain the following information:
•
presence of networked chillers (if touching the chiller you access the chiller screens);
operating mode of the chiller (winter , summer , DHW , OFF if none of the previous three symbols appear on
the screen);
•
operating status of the chiller (compressor running): the operation of the chiller graphically indicated by the rotation
of the fans).
Furthermore, the following information on fan coils can be found directly on the home page:
•
Presence of networked fan coils, if the fan coil symbol appears (Figure 8. Networked fan coils.);
•
Fan coil units in dehumidification mode, if the symbol of the drops on the fan coil appears (Figure 9. Fan coils in
Figure 8. Networked fan coils.
Figure 9. Fan coils in dehumidification mode.
3.4.1
CHILLER/HEAT PUMP PAGE
From the home page, touching the chiller symbol (sensitive area number 1, Figure 5. Home page – indication meanings.), grants
access to the screen of the chillers present in the network.
From here you can access to the information related to the operations of the chiller; then you can uniquely identify each chiller
present by giving them names.
Figure 10. Chiller page – information and sensitive areas.
The information on the chiller’s page is:
Chiller 01
Status
ON
Mode
5
3
7
4
1
2
6
8
9
boost
