Hi-T2
Centralised controller
9
3.4
HOME PAGE
The home page has the following appearance:
Figure 5. Home page – indication meanings.
From the home page it is possible to access the different device’s screens, by simply touching the displayed resource.
The sensitive areas (indicated in the image by red boxes) inside this page are:
1.
Chiller/heat pump (for multi-circuit units, only the resources of the first circuit are displayed)
2.
System status and mode
3.
Fan coil (with a status message of dehumidification active mode)
4.
Display of any active alarms in the system
5.
Information and location of the company
6.
Name of the keyboard (access to information on the firmware version)
7.
Configuring the Ethernet network
8.
Log-out (intermittent symbol if active)
9.
Navigation arrow, next page.
Graphically, it also contains information on the presence or absence of the following utilities:
10.
Storage tanks (plant or whether solar storage tank is present)
11.
Radiant panels
12.
Sanitary mode
13.
Solar.
On the main screen, in fact, only utilities present and properly installed in the network or the active warnings at the time of viewing
are displayed.
If, for example, the network consists only of one or more chillers/heat pumps, without production of DHW and without storage
tank, the screen graphically shows the presence of the chiller, but no other utilities appear inside the house; in this case the
appearance is as below (Figure 6. Home page – only chiller is networked.):
Figure 6. Home page – only chiller is networked.
logout
2
3
1
11
12
13
5
6
4
7
8
9
10