Max PJID143 Operating And Maintenance Manual Download Page 19

19

7. MAINTENANCE

Before inspecting the tool, make sure that 
the Battery pack is not set in the tool.

Failure to do so may cause serious injury. 

Before inspecting the Battery charger 
JC928, make sure that the Charger is dis-
connected from the power supply.

1

Regularly inspect the tool

In order to maintain the performance of the 
tool, periodically clean up and inspect the 
tool.
Examine the screws regularly to make sure 
they are securely tightened.
Incomplete tightening may result in an acci-
dent or breakage. If a screw is loose, retight-
en it completely.

2

Do not lubricate the equipment

Absolutely do not lubricate this equipment. 
Applying lubrication will remove the grease 
inside of the tool, and cause problem on the 
tool.

3

Do not soak the tool to any liquid. Do not 
put any liquid in the tool.

8. STORAGE

Do not store the tool in a cold weather environ-
ment. Keep the tool in a warm area.
When not in use, the tool should be stored in a 
warm and dry place. Keep out of reach of chil-
dren. All quality tools will eventually require serv-
icing or replacement of parts because of wear 
from normal use.

STORE THE TOOL

When you have finished using the tool or when 
the tool will not be used for a while, remove the 
battery pack from the tool. Tool, attachments and 
accessories should be stored in a well-ventilated 
dry place where the temperature will not exceed 
40°C (104°F) and not become less than -20°C (-
4°F).
The battery pack, with a pack cap installed on 
the pack's terminal to prevent short circuits, 
should be stored in a well-ventilated dry place 
where the temperature will not exceed 30°C 
(86°F) and not become less than -20°C (-4°F).

WHEN STORING THE BATTERY PACK FOR A 
LONGER TIME THAN 6 MONTHS WITHOUT 
USE, 
TO KEEP THE PERFORMANCE OF THE BAT-
TERY PACK, FOLLOW THESE INSTRUC-
TIONS ;

Fully recharge before storage.

Put a Pack cap on the Battery pack’s termi-
nal to prevent short circuits.

Store the Battery pack in a well-ventilated 
dry place where the temperature will not be  
less than -20°C(-4°F) and will not exceed 
30°C (86°F).

Do not store the Battery pack in a place 
where is under direct sunshine.

WARNING

CAUTION

PJID143-2Lang.book  19 ページ  2010年6月24日 木曜日 午後7時17分

Summary of Contents for PJID143





















Reviews: