INSTRUCTIONS
-
Always make sure that your hair is completely clean before using this hair dryer.
-
Make sure there is no water on the floor or on other surfaces near the outlet or near the hair dryer.
-
Insert the plug of the hair dryer into the outlet. The hair dryer could have a polarized plug, which has one
pen and is wider than the other. If this is the case, this plug will only fit into an outlet when it is placed
correctly. When the plug does not fit into an outlet, make sure that you have the large pin stabbed into the
correct hole. If you cannot plug in the plug without any problems, please contact an electrician; never try to
force stabbing the plug into an electrical outlet.
-
Insert the plug of the hair dryer into a socket and slide the switch on the inside of the handgrip to the 1st or
2nd position.
-
The hair styling tool will become very hot immediately, but it will take about 40 seconds before it has an opti
mal uniform heat distribution.
-
The hair styling tool becomes very hot, so make sure it does not make contact with the skin.
-
Allow your hair to cool down before touching or brushing it.
-
After blow-drying your hair, switch off the hair styling tool by putting the switch to “off”, unplug the power
cord and allow the hair styling tool to cool down completely on a heat-resistant
surface before storing it. Never leave the styling tool in the outlet or turned on if you are not around.
SAFETY INSTRUCTIONS
-
Always unplug the appliance immediately after using.
-
Do not use while bathing.
-
Do not place or store appliance where it can fall or be pulled into a tub or sink.
-
Do not drop into water or other liquids.
-
If the appliance falls into water, unplug immediately. Do not reach into the water.
-
This appliance should never be left unattended when plugged in.
-
Close supervision if necessary when this appliance is used by, on, or near children or individual with certain
disabilities.
-
Use this appliance only for its intended use as described in the manual. Do not use any attachment not
provided by the manufacturer.
-
Keep the cord away from the heated surface.
-
Do not warp the cord around the appliance.
-
Do not use outdoors or operate where aerosol products are being used or where oxygen is being
administered.
-
Do not use an extension cord with this appliance.
-
Do not place the heated appliance directly on any surface while its hot or plugged in.
BURNS
-
The styling tool is very hot and can cause burns. Do not touch the heated element while the styling tool is
connected. Make sure that the styling tool has enough time to cool down.
-
When you burn yourself, stop with styling your hair and take care of the burn immediately.
-
Make sure you switch off the styling tool after each use. Never leave a styling tool unattended if it is
connected or switched on.
-
Keep the styling tool away from flammable surfaces, plastic or other materials that are sensitive to heat.
-
If you have to put the styling tool down while it is turned on, only do it on a heat-resistant surface. It is best to
use a heat-resistant mat or holder for your Max Pro Styling tool to prevent damage to your
furniture. This heat-resistant mat can be ordered on our website www.maxprohair.com.
Summary of Contents for SINGLE AIRSTYLER
Page 1: ...MANUAL SINGLE AIRSTYLER...
