Transmitter
Preparing the transmitter
The function switches on the transmitter
1.
Aerial
2.
Throttle Trim
3.
Steering Trim
4.
Frequency Crystal
5.
Throttle Trigger
6.
Power Switch
7.
Battery level indicator
8.
Steering reverse switch
9.
Throttle reverse switch
10.
Steering Control (wheel)
1
8
9
7
6
10
2
3
4
5
Throttle/Steering Trim
Throttle Trim
1.
Turn anti clockwise for more
brake
2.
Turn clockwise for more
throttle
Steering Trim
1.
Turn anti clockwise to trim to
the left
2.
Turn clockwise to trim to the
right
1 2
1 2
Throttle Trigger
1.
Push the trigger forward to
brake
2.
Pull the trigger backwards to
go forwards and speed up
2
1
Neutral
Steering Wheel
Turn the steering wheel to the left
or right to make the go vehicle left
or right
L
R
Insert the aerial into
the hole and turn
clockwise until it is
tightly secured.
Open the battery holding
tray to expose the empty
battery slots.
Insert 8 AA batteries into
the marked spaces.
Please note the correct
direction of the batteries
Incorrect battery insertion
could lead to damage
Close the battery holding
tray to safely conceal and
secure the batteries.
Transmitter
Your Transmitter is an advanced controller designed for the beginner to be easy to use and tune. You will need to
follow the steps below to ensure you prepare the controller correctly for use and understand the adjustment
possibilities available.
Throttle/Steering Trim
1 2
1 2
5
Insert 8 AA batteries into
the marked spaces.
Please note the correct
direction of the batteries
Incorrect battery insertion
could lead to damage
Preparing the transmitter
Insert the aerial into the
hole and turn clockwise
until it is tightly secured.
Make sure you never over
extend the aerial as this
will cause it to break.
Open the battery holding
tray to expose the empty
battery slots.
1.
Aerial
2.
Throttle Trim
3.
Steering Trim
4.
Frequency Crystal
5.
Throttle Trigger
6.
Steering Control
(wheel)
7.
Power Switch
8.
Battery level
indicator
9.
Steering reverse
switch
10.
Throttle reverse
switch
11.
Steering Throw
dial
12.
Steering End
Point dials (left/
right lock)
13.
Throttle End Point
dials (low/high
points)
The function switches on the transmitter
6
2
3
1
4
5
8
9
7
10
11
12
13
Throttle Trigger
Steering Wheel
2
1
Neutral
1.
Push the trigger
forward to brake
2.
Pull the trigger
backwards to go
forwards and
speed up
L
R
Turn the steering wheel
to the left or right to
make the go vehicle
left or right
Throttle Trim
1.
Turn anti clockwise for
more brake
2.
Turn clockwise for more
throttle
Steering Trim
1.
Turn anti clockwise to trim
to the left
2.
Turn clockwise to trim to
the right
End Point Adjustment Dials
Both steering and throttle have high point adjustments which
allows you to adjust left and right steering lock & high and low
throttle points. You can also adjust the overall lock your
vehicle has after adjusting your individual side locks.
All of these adjustment dials require an anti clockwise
movement for more and clockwise movement for less.
Summary of Contents for Strada MT
