The Guardian Manual
8 |
P a g e
Rev. 01 | December 2017
PART 4: EQUIPMENT WIRING AND INVERTER RESET
When wiring the equipment, be sure to strictly follow instructions.
4.1 NOTICES FOR WIRING
1)
If you want to wire the machine by yourself, it must be under the instruction of a professional electrician or the
technicians of the manufacturer.
2)
The electrical system of this equipment must strictly follow the parameters (voltage and frequency) designated on the
nameplate. Before being connected with the input power, check and ensure that the voltage and the frequency of the
external power supply are correct.
3)
This equipment must be connected to the power system equipped with grounded electricity, preventing an electric
shock to the operator.
4.2 THE GENERAL WIRING OF SWITCH BOX, INVERTER AND MOTOR
1)
If you need to perform a wiring job, contact our company and do it under our instructions. Any wiring without our
instruction will void your warranty.
4.2 INVERTER RESET
1)
Our inverter is specially designed to our equipment. Any stops of the inverter will result in an error data on the LED
display. Take a picture of the error data and send it to our company> We will provide instructions on how to solve
the problem.
Summary of Contents for Guardian
Page 1: ......
