EV Charger Connection Unit
V1.10
4 |
P a g e
Introduction
The
matt
:
e
range of Electric Vehicle Charger Connection Units are
fitted with O-PEN technology designed to protect Electric Vehicle
Charging equipment when installed onto 3 phase PME infrastructures.
The unit incorporates one or two 5 pole isolator(s) with a built-in
under-voltage release mechanism. On detection of fault conditions the
O-PEN electronic circuit de-energises the under-voltage release
mechanism which disconnects all poles of the supply including CPC. The
5 pole isolator is manually resettable in line with IET Wiring Regulations
and code of practice.
If the O-PEN monitor detects a fault and activates the isolator the
monitor must be reset by cycling power to the unit. It does NOT
automatically reset.
The
matt
:
e
O-PEN technology does not require earth rods or measuring
electrodes to function correctly.
The units are designed to be installed indoors between the distribution
board and the Electric Vehicle Charger. The unit must be mounted
securely to a solid surface with the lid hinges on the left.
The installation location should be clean, dry and well ventilated.
Please refer to the diagrams on the following pages for the dimensions
and mounting arrangement of the units
Summary of Contents for EVU-1-100TP
