Matt:e EVU-1-100TP, Installation Manual

Page: 3 / 18

EV Charger Connection Unit
V1.10 3 | P a g e
Once installed, the unit has a Live Mains Supply (400v or higher)
within the enclosure. The cover must not be removed until the
supply to the unit has been isolated or disconnected.
Product Description
The
matt
:
e
Electric Vehicle Charger Connection Units (EVCCU) are
designed for use in commercial applications where 3 phase PME
supplies are feeding Electric Vehicle Chargers.
This manual covers the EVU-2-32TP-M, EVU-2-32TP-R, EVU-3-32TP-M,
EVU-3-32TP-R, EVU-3-32-R & EVU-3-32-M units.
The units are not intended for any purpose other than that defined
within this document.
WARNINGS
Please read and observe the following notices carefully. These
warnings must be observed when installing and operating the Electric
Vehicle Charger Connection Units.
All relevant supplies must be isolated or disconnected before commencing
any work. This product must be installed by a competent person in
accordance with the IET Wiring Regulations, BS7671 (18
th
Edition or later)
and any relevant Building Regulations and/or Installation Regulations.
Safety Advice
The unit must be installed in a dry ventilated location; it must never be
covered or have restricted ventilation.
The EVU-3-32-x and EVU-1-32-x units are rated for a maximum 32A.
The EVU-3-63-x and EVU-1-63-x units are rated for a maximum 63A.
For any information not contained within this document, please contact our
technical support team on 01543 227290 or info@matt-e.co.uk.