-10-
9.4 UCIMAG Track Data Commands
:CA
- Clear All tracks
Returns: Cr/Lf
:TA
- Transmit All tracks (1,2,3)
same as sending :T1, :T2, :T3 in sequence
note: track data will only be send if the track enable bit for that particular track is set
:Tt
- Transmit track
‘
t
’
data buffer in ASCII
where t = 1,2, or 3 for the track number
Example Returns: T1:%1234567890?.<sl><sh>.<cr><lf>
If there is an LRC error in the track data a:
T1:error.<cr><lf>
:Ct
- Clear track t
:Dt
- Raw hex dump of track t
:Hb
- Enable/disable auto dumping of tracks for debug only
9.5 UCIMAG LED Commands
:Ib
- Set LED output on or off,
b=0 means off, b=1 means on
Returns: Cr/Lf
9.6 UCIMAG Reset Command
:RX
- Reset System
9.7 Default settings
Firmware Version = PANASONIC MIECOA UCI-MAG v3 Copyright 1996-1998
Baud Rate = 9600BPS , no parity, 8 data bits, 1 stop bit
Reader Type = 2 (Full Insertion)
Read Direction = 1 (Backward)
Track 1 = Enabled
Track 2 = Enabled
Track 3 = Disabled
AutoNotify = TRUE
AutoSend = TRUE
AutoClear = TRUE
Include Start & End = TRUE
