3
1.
It would be rather safe if the power supply is operated on an insulation board, which is
withstand the voltage used.
2.
Try to handle the power supply or load with your right hand, and try to keep the left hand, for
example, putting it pocket.
3.
Ground the output more than 10 seconds before touching the load after turning off the power
supply even long time has past after turning off the power supply.
１－５ Troubleshooting
・In case there is no output voltage
１．Check if the proper input voltage is supplied to the power supply.
・
Power supply input voltage, 115V AC +/-10%, 50/60Hz single phase
・
Control voltage for external voltage control is 0 to +10V
２．Check if the connection of control on the rear panel is correct.
３．Check if the function of option is properly operated.
FOR SAFER OPERATION
１ Introduction
Summary of Contents for EC Series
Page 1: ...Rev 0 6 B N 024 9 005 024 9 005 MODEL EC series Instruction Manual F RA 001 3R0 ...
Page 19: ......
Page 20: ......
