Matsui MS452S, Instruction Manual, Page: 9 / 21

6
Please follow the steps below to pour the salt into the salt reservoir and it must be set to correspond to the water
hardness level in your area.
If the water in your area is hard, deposit will form on your dishes and utensils. As such, this appliance contains a salt reservoir for
you to reduce the hardness of water.
1. The salt warning light will illuminate when the reservoir is running out of salt
and required re-filling.
2. The salt warning light will cease to illuminate within a few days depending on
how quickly the salt dissolves.
3. Be careful not to overfill the reservoir. Wipe up any spills.
Fig 1 Fig 2
1. Remove the lower basket and unscrew the reservoir cap. (Fig 1)
2. Fill the reservoir with approximately 500ml of water (first use only).
3. Place the funnel provided over the salt reservoir. (Fig 2)
4. Place approxim ately 1.2kg of salt depending on the brand used.
5. Clean any excess salt from around the reservoir opening and then
screw the cap on again firmly.
6. Run the rapid wash programme immediately (without any crockery in
the dishwasher) to remove any traces of salt from the com partment.