- 25 -
Add New Channels
This tuning menu consists of two parts:
• Automatic Search
• Manual Search
Installation
Add New Channels
First Time Installation
Automatic Search
Manual Search
Automatic Search
Automatic search is started by pressing the
OK
button in the auto-search pop up menu.
All the services will be searched and a channel
table will be created automatically.
All channels found are stored in a sorted form
with respect to their channel numbers. Some
services may not appear with the correct
channel number. If the broadcaster has no
channel information, this may happen due to
missing info.
Manual Search
In manual search, the number of the multiplex
is entered manually and only that multiplex is
searched for the channels. For every valid
channel number, signal level, signal quality
and network name are shown at the bottom
of the screen.
In both manual and auto search, any existing
channel in the database is not re-stored to
avoid redundant duplicates of that channel.
First Time Installation
The user can use this item to load default
settings, which were loaded to the receiver at
the factory.
To install factory settings, highlight
“First Time
Installation”
menu and press the
OK
button.
Installation
Add New Channels
First Time Installation
Then you will be asked to confirm for deleting
all channels and settings:
Yes
Your previous digital channel list will be destroyed.
Are you sure you want to delete all digital channels
and settings for first time installation?
No
By selecting
Yes
and pressing the
OK
button,
the existing channel table will be deleted.
After factory settings are loaded, “
First Time
Installation
” menu will be displayed:
Please ensure aerial is plugged in. Do you
want to start first time installation?
Yes
No
Press the
OK
button to start installation. After
search is completed for digital channels, a
message asking whether to search for
analogue channels appears on the screen:
Yes
Do you want to search for
analogue channels?
No
Press the
OK
button to search for analogue
channels.The following menu appears on the
screen for analogue channel search:
Auto. Programming System
Country
U.K.
Check the antenna cable
Start : Ok
Exit : TV
Language
English
Txt. Region
West Europe
Set
Language
item by pressing
or
button.
Press
or
button to highlight
Country
item
and then use
or
to set. Press
or
button to highlight
Txt. Region.
Select a region
by using
or
button. When finished, press
OK
button to continue. To cancel, press the
TV
button. The following menu will be
displayed during the APS process:
00-ENG-01-TV-2297W-UK IDTV-1165UK-VGA-10057841.p65
25.06.2008, 09:07
25
