Chapter 3
30
Soft-Off by
PWRBTN
This system supports a software power down.
The system can be resumed from a software
power down by an alarm, or by traffic on a
network or fax/modem. Use this item to
determine how the power button can be used to
cause a software power down.
HDD Power Down
Use this item to set a powerdown timeout for
the hard disk drive. If the time passes with no
activity, the hard disk powers down.
Doze Mode
Use this item to set a powerdown timeout for
the power saving doze mode. If the time passes
with no activity, the system enters doze mode.
Suspend Mode
Use this item to set a powerdown timeout for
the power saving suspend mode. If the time
passes with no activity, the system enters
suspend mode.
VGA
If this item is enabled, any video activity will
resume the system from a power saving mode
or a software power down.
LPT & COM
If this item is enabled, any activity through the
serial ports or the parallel port will resume the
system from a power saving mode or a
software power down.
HDD & FDD
If this item is enabled, any activity on the hard
disk drive or the floppy diskette drive will
resume the system from a power saving mode
or a software power down.
DMA/master
If this item is enabled, any activity through the
DMA channels will resume the system from a
power saving mode or a software power down.
Wake Up On LAN
If this item is enabled, the system can be
resumed from a power-saving mode or a
software power down by incoming traffic to a
LAN adapter.
Modem Ring
Resume
If this item is enabled, the system can be
resumed from a power-saving mode or a
software power down by incoming calls to a
fax/modem.
