43
Boot Up Floppy Seek
Default: Enabled
If this item is enabled, it checks the geometry of the floppy disk drives at
start-up time. You don’t need to enable this item unless you have a
legacy diskette drive with 360K capacity.
Boot Up NumLock Status
Default: On
This item defines if the keyboard Num Lock key is active when your
system is started.
Gate A20 Option
Default: Normal
This item defines how the system handles legacy software that was
written for an earlier generation of processors. Leave this item at the
default value.
Typematic Rate Setting
Default: Disabled
If this item is enabled, you can use the following two items to set the ty-
pematic rate and the typematic delay settings for your keyboard.
Typematic Rate (Chars/Sec)
Default: 6
If Typematic Rate Setting is enabled, you can use this item to define
how many characters per second are generated by a held-down key.
Typematic Delay (Msec)
Default: 250
If Typematic Rate Setting is enabled, you can use this item to define
how many milliseconds must elapse before a held-down key begins
generating repeat characters.
Security Option
Default: Setup
If you have installed password protection, this item defines if the pass-
word is required at system start up, or if it is only required when a user
tries to enter the Setup Utility.
OS Select For DRAM > 64 MB
Default: Non-OS2
This item is only required if you have installed more than 64 MB of
memory and you are running the OS/2 operating system. Otherwise,
leave this item at the default Non-OS2.
