Hardware Setup
15
LAN/Modem Ring Power-On
While in Soft-off/Suspend state, if an external LAN/
modem ring-up signal occurs, the system will wake up
and be remotely accessed. Please refer to the BIOS Setup
section.
Alarm Wake Up
If you want to autoboot the system at a certain time, set
the RTC Alarm time. Please refer to the BIOS Setup
section for more information.
CN1 – ATX Power Connector
The ATX power supply is a single 20-pin connector.
Connect the ATX power supply to this connector will
provide all necessary power for the mainboard.
Pin Description Pin Description Pin Description Pin Description
1 3.3V 6 +5V 11 3.3V 16 Ground
2 3.3V 7 Ground 12 –12V 17 Ground
3 Ground 8 Power OK 13 Ground 18 –5V
4 +5V 9 5VSB 14 PS-ON 19 +5V
5 Ground 10 +12V 15 Ground 20 +5V
