matson RA1700 Operator'S Manual Download Page 6

USE AS AN ALTERNATIVE POWER SUPPLY

Since most vehicles have electronic components (alarm systems, radios, etc) 

whose memory can be lost when the battery is disconnected, the portable 

power source is a useful tool when replacing a battery. By connecting the DC 

extension cord to the vehicle’s cigarette lighter, the memory can be retained.

USE AS A MULTIPURPOSE POWER SOURCE

1.  The portable power source can also be used to power any equipment that 

incorporates a 12 volt DC male adapter. the DC outlet on the portable 

power source comes equipped with overload protection. DC power will be 

generated only through the DC outlet.

2.  Used with an inverter, the portable power source can operate appliances 

normally powered by 220 Vac. A 300 Watt maximum inverter is 

recommended.

ANTIZAP

®

 PROTECTION

The RA1900 has built in Antizap

®

 Surge Protection, which will 

protect against surge and spikes. When the clamps are connected, 

the Antizap Protected Safety LED indicator should light up, indicating 

that the entire circuit is now protected.

If the Reverse Connection & Warning Buzzer LED’s will illumination 

and a warning buzzer will sound. Stop immediately as you have 

connected the clamps in reverse.

Summary of Contents for RA1700











Reviews: