8. A lead-acid battery can produce a short-circuit current strong enough to
weld metal to skin. Remove all jewellery and personal metal items when
working with a lead-acid battery.
9. Do not use the portable power source to charge dry-cell batteries. These
batteries may burst and cause injury and damage to persons or property.
10. Do not attempt to charge or boost a frozen lead-acid battery.
11. Even though the portable power source is equipped with polarity
protection, prevent clamps from touching each other or contact the same
metal to prevent accidental arcing.
12. Use of an attachment not recommended or sold by the manufacturer may
result in a risk of damage to the unit or personal injury.
13. When using the wall charger or power extension cord, pull on the plug and
NEVER ON THE CORD when disconnecting.
14. Replace damaged wall charger or power extension cord immediately. Do
not attempt to recharge the portable power source with damaged cords.
15. The portable power source is designed for use under all weather
conditions.
16. Prevent submersion in water.
17. Do not operate with flammables in the vicinity such as gasoline etc.
18. If the portable power source is damaged in any way, discontinue use If the
portable power source is leaking battery acid do not scrap it. Take it to the
closest battery recycler in your area.
19. The portable power source should never be left in a total discharge state
for any period of time. Damage to the battery could be permanent.
When not in use, leave the portable power source connected to the wall
charger or recharge every six (6) months.
OPERATIONAL AND SAFETY DESIGN FEATURES
1. The portable power source provides more then enough starting power for
most vehicles. May also be used in deep cycle applications.
2. The portable power source will power most 12 volt DC equipment with a
male cigarette DC plug.
3. The portable power source comes equipped with DC automatic overload
protection.
4. The portable power source contains 1 x 12 volt sealed battery
