6
Matrox PJ-4OLP – User Guide
Connection setup
This section describes how to connect computer monitors to your Matrox product.
To use 4 computer monitors at a time, make sure your monitors support the same settings (such as
display resolution and refresh rates). All your monitors must be of the same type, either analog or
digital.
While using 4 monitors at the same time, certain limitations may apply. For more information,
“Display information”, page 24
.
1
Connect your dual-monitor
cables
Attach your Matrox dual-monitor cables to
the connectors on the bracket of your
Matrox card. Make sure the connectors are
properly fastened.
Dual-monitor
cable
WARNING:
To avoid damaging the LFH-60 connector on your
dual-monitor cable or on your graphics card, carefully insert the
connector on your dual-monitor cable as straight as possible into the
connector on your graphics card. Specifically, inserting the
connectors into each other at an angle is likely to bend and damage
the pins on the connector of the dual-monitor cable.
