Matrox Meteor-II, Installation And Hardware Reference Manual

Page: 47 / 70

Board input and output connectors 47
Use Matrox cable DBHD44-TO-8BNC to interface with this connector. It has
eight BNC connectors and a high-density 44-pin D-Subminiature male
connector. This cable allows you to attach up to six video sources, an analog sync,
and a trigger input.
41 VID2_IN2 GREEN Analog Video Input (Channel 2).
40 VID2_IN3 BLUE Analog Video Input (Channel 2).
35 O Opto-Isolated trigger positive input.
34 OPTOTRIG- Opto-Isolated trigger negative input.
20 TRIGGER Non-Protected TTL trigger input.
19 CLK_IN_TTL Clock input (TTL).
33 CLK_OUT_TTL Clock output (TTL).
32 VSYNC_TTL Vsync input or output (TTL).
2 HSYNC_TTL Hsync input or output (TTL).
38 EXP(1) Exposure #1 output (TTL).
23 EXP(2) Exposure #2 output (TTL).
36 TX Transmit (RS-232).
22 RX Receive (RS-232).
6 CTS CTS (RS-232).
21 RTS RTS (RS-232).
39 Auxiliary User Input #1 (positive).
12 USER1IN- Auxiliary User Input #1 (negative).
9 Auxiliary User Input #2 (positive).
10 USER2IN- Auxiliary User Input #2 (negative).
24 USER1OUT Auxiliary User Output #1 (TTL).
8 USER2OUT Auxiliary User Output #2 (TTL).
1, 16 DC POWER +12 V OR +5 V Power Supply.
7, 37 NC Not connected.
3-5, 14, 17-18,
25-31,42 GND Ground.
Pin Signal Description