Connecting external devices
27
•
PC/104 (ISA) connectors.
Two interface connectors to allow data to be sent
between the ISA bus and other PC/104 or PC/104-Plus boards, stacked on top
of the Matrox Meteor-II board.
Connect video sources to Matrox Meteor-II /Standard through its video input
connector, a 30-pin right-angle male connector. A standard cable for PC/104
-Plus
form factor boards is not available from Matrox. You can use the included mating
connector, crimp the ribbon cable to it and attach your required connector to the
other end of the ribbon cable. Then, connect this custom cable to the video input
connector. See Appendix B for the pinouts, signals, and ribbon cable information
for the /Standard board.
The Matrox Meteor-II /Standard for PC/104-
Plus,
designed for Matrox 4Sight-II,
has a custom video input connector that attaches directly to the motherboard,
which in turn, is hard-wired to the video-input connector on the back side of the
unit. Therefore, you can interface a camera with the PC/104-
Plus
board by
connecting the camera to your unit’s video input connector. Detailed information
on connecting a video input to this board can be found in the
Matrox 4Sight-II
installation and hardware reference
manual.
PC/104-
(PCI)
connector
Plus
PC/104
(ISA)
and P2
connectors
P1
Video input
connector
P1
P2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
