Matrox G450 MMS – User Guide
5
Connection setup
This section describes how to connect computer monitors to your Matrox product.
1
Connect your dual-monitor
cables
Attach your Matrox dual-monitor cables
*
to
the connectors on the bracket of your
Matrox MMS card. Make sure the
connectors are firmly in place.
Note:
Windows 200/XP –
If you want to use TV output with your Matrox product, you first
need to connect at least one (1) computer monitor to be able to install the display driver.
After the display driver is installed with TV output support, you can connect your dual-
TV-output cables. For more information,
see “TV output”
in the online version of this
guide.
* Only one dual-monitor cable is included with Matrox MMS×2 cards.
WARNING:
To
avoid damaging the
LFH-60 connector
on your dual-
monitor cable or on
your graphics card,
carefully insert the connector on your
dual-monitor cable as straight as possible
into the connector on your graphics card.
Specifically, inserting the connectors into
each other at an angle is likely to bend and
damage the pins on the connector of the
dual-monitor cable.
Dual-monitor
cable
