Matrix U5X-02, Service Manual

Page: 35 / 62

31
8.5 CoNSole keyPAD / oVeRlAy RePlACeMeNT - CoNTiNUeD
CHAPTeR 8: PART RePlACeMeNT gUiDe
figURe H figURe i
figURe j
9) Press down on the corners of the overlay to keep it in place, then remove the protective film (Figure H & I).
10) Once the overlay is in the correct position, press down on the overlay with a cloth to adhere it to the console plastic (Figure J).
11) Use the same procedure to replace any additional faulty overlays. NOTE: Overlays can not be reused.
12) Test the bike for function as outlined in Section 8.20.