Matrix T1XE-03, Service Manual, Page: 79 / 82

76
11.1 SOFTWARE UPGRADE PROCEDURE
* All plug ins must be removed prior to updating software (for example, no IPod can be connected). Do not use the console while an
update is in process.
** If VA is installed on the console, wait until the Virtual Active icon on the standard display picture turns red prior to updating the
software.
1) Copy five software files (3xeAllDeploy.cab, NK, IO_XXX, updateLMM.cofige and Extract_CE) onto a USB drive.
2) Turn on the power to the Treadmill, wait until the standby picture has come up (Figure A).
3) Insert the USB drive into the USB Port in the console (Figure B).
4) After a few seconds, the Suspension Elliptical will run the auto update processing (Figure C). The achieved percentage of the scheduled
process will be displayed (Figure D).
FIGURE A FIGURE B
FIGURE C
FIGURE D
CHAPTER 11: SOFTWARE UPGRADE GUIDE