Matrix SETU VGFX, Quick Start Manual

Page: 6 / 36

Get your Internet Connection ready:
To install VGFX, you must have:
1.
Broadband Internet connection from an ISP to make and receive calls through
public internet. If you want to make calls within your network, you do not
need an internet connection.
2. Connection from an Internet Telephony Service Provider (ITSP) to activate
your SIP Trunks. You do not need an ITSP connection for making Peer to
Peer calls.
Get your Network Information ready:
Ask your LAN Administrator/ISP for:
1.
IP Address
2. Subnet Mask
3. Gateway Address
4. DNS Address
5. DNS Domain Name
Ask your ITSP for:
1. SIP ID/User ID
2. Authentication User ID (in most cases it is same as SIP ID)
3. Authentication Password
4. Registrar Server Address
5. Registrar Server Port
6. Outbound Proxy Server Address
7. Outbound Proxy Server Port
To install VGFX, you should also have:
1.
An active SIM card/s from GSM service provider.
2. Analog trunk line from Public Switched Telephone Network (PSTN).
Installing SETU VGFX
Take proper precautions while installing VGFX to reduce the risk of fire, electric
shock and injury to the system as well as the person using it. (Refer Installation
Precautions and Safety Instructions under 'Protecting SETU VGFX' topic in the
System Manual)
Mounting SETU VGFX on wall:
SETU VGFX should be installed at the airy, dust free and moisture free place.
•
Select a suitable place on the wall for mounting SETU VGFX.
• Put the mounting template on the wall and mark the nail hole on the wall.
• Drill a hole of appropriate size.
• Insert the screw and tighten it leaving the screw head a few millimeters
protruded of the wall.
• Check the strength of the nail.
• Hang VGFX on the wall.