manualshive.com logo in svg

Matrix SETU VGFX, Quick Start Manual

Share
Download
Matrix SETU VGFX Quick Start Manual Download Page 13

Step 1: SIM PIN

SIM PIN is a security feature used by the GSM network. This feature is used to
protect the SIM card inserted in the system from mis-use.
•

If this feature is enabled, the network will ask the user to enter SIM PIN at
every Power On.

•

If the user enters wrong SIM PIN for three times then the network suspects
the user and asks for the Personal Unlock Keyword (PUK).

•

If wrong PUK number is entered for ten times then the SIM Card will become
useless.

Follow the steps given below to enable SIM protection or change SIM PIN in
VGFX:
•

Switch Off VGFX.

•

Remove SIM card and insert the same in the mobile instrument.

•

Enable 'SIM PIN at Power ON' parameter in the SIM card. (This step is not
required if SIM protection is already ON)

•

Change the SIM PIN of the SIM card to 1234. (default)

•

Remove SIM card from the mobile instrument and insert it in VGFX.

•

Switch on the system and change the SIM PIN after it attains normal working
position.

SE should take above steps to change the SIM PIN of the SIM Card in case
SIM protection of SIM Card is enabled and SIM PIN of SIM Card and VGFX
is different else VGFX will not initialize.

(Refer 'Port Parameters-Mobile' feature in System Manual for more details)

Step 2: Date and Time

Click on 'Date and Time Settings' link and program following parameters:

Summary of Contents for SETU VGFX





































Reviews:

No comments

Brands by name

Popular brands

Load more brands