manualshive.com logo in svg

Matrix SETU VGFX, Quick Start Manual

Share
Download
Matrix SETU VGFX Quick Start Manual Download Page 21

•

Use Symmetric RTP?:

 This parameter is applicable only for peer to peer

calls. Select 'Yes' if SETU VGFX is located on public IP and calls are made
and received from the SIP client located behind the NAT router.
•

Valid options: Yes/No

Default = No

(Refer ‘Port Parameter-SIP’ in System Manual for more details).

Step7: Routing Groups

Create Routing Groups for all the port types. To program Routing Groups for
Mobile Ports, click on 'Mobile Port Groups' link and program the following
parameters:

•

Member Selection Method:

 In this field, select the method for selecting

member from a group for placing the call on Mobile Port.
•

Valid options: First Free/Rotation

Default = Rotation

•

Members:

 Program desired Mobile Port number in each of the member

field. VGFX shall place the call on any of these members as per member
selection method programmed for the group.

Similarly create Routing Groups for FXS Ports, FXO Ports and SIP Trunks
also.
(Refer 'Routing Group' feature in System Manual for more details)

Summary of Contents for SETU VGFX





































Reviews:

No comments

Brands by name

Popular brands

Load more brands