●
The remote control function may be out of work if there is a
barrier between the remote control and heater .
●
Replacing the batteries duly so as not to affect the normal use of
heater and remote control.
Operation Instruction
●
Remove all package material (including anti-vibration object of the lamp) and
check the appliance, supply cord and the plug for signs of damage.
●
Pay attention to the mounting place and all mounting material(dowels, screws).
Ensure they are suitable and stable enough for mounting and lastingly holding
of the appliance.
●
Before mounting, the minimum safe mounting distances and tilt angles shown
in the figures must be strictly followed.
●
The distance between the bottom edge of the appliance and the floor must be
at least 1.8 M. See figure 2.
●
There must be a distance of at least 0.25 M between the appliance and the
ceilings, roofs or other covers. See figure 2.
●
There must be a distance of at least 0.5 M at each side between the appliance
and walls or the like. See figure 2.
●
Recommended degree to mounting surface is 45°. See figure 3.
●
Pay attention that, the installation of the appliance must not add excessive
wind load. (can not use fan to blow the heater or add spare part inside the
heater)
●
Fix the mounting bracket to the ceiling l first. Ensure that the place to be
installed is secure and firm. Or connect the appliance to the stand.
●
Adjust the desired angle of radiation and fest screw all screws. Check regularly
the screw's connection. Mechanical bearing pressure and oscillation due to
wind or rain could lead to loose.
●
Plug in the power source and operate the remote control. Then observe,
whether during the first 10-15 minutes the appliance works trouble-free.
●
If you do not use,please remove batteries from the socket of remote control.
Figure1: Mounting bracket and anchor
dowels provided. Connection from the wall
to the infrared heater.
Figure2: Min. distance to floor, ceiling and
wall.
Figure3: Tilt angle.
Figure 4: Max.remote distance
Cleaning and Maintenance
●
This appliance is consist of a robust and maintenance-free aluminum casing
with a protection cover. No user serviceable parts inside.
●
Before cleaning,remove the plug from the power outlet and wait until the
appliance is sufficiently cooled off.
●
Wipe the appliance only with clean and lint-free cloth or a soft brush.
●
Never use abrasive cleaners, scrubbing brushes and chemical cleaners for
cleaning!
●
Can use alcohol to clean the appliance.
●
To protect against electrical shock and danger of life, do not immerse cord,
plug, or any part of the appliance in water or other liquid.
●
For heating element replacement ,please contact the manufacturer or its
service agent or a similarly qualified person.
●
Any other service, please contact with the service agent or a suitably qualified
electrician.
Storage
Do not route cord when heater storage, or heater is not in use.
Disposal
In accordance with European Directive 2011/65/EU concerning used
electrical and electronic appliances (waste electrical and electronic
equipment – WEEE), please return any electrical equipment that you will no
longer use to the collection points provided for their disposal.
This symbol indicates that the appliance cannot be treated as normal
domestic trash, but must be handed to a collection point for recycling
electric and electronic appliances.
Information concerning where the equipment can be disposed of can be
obtained from your local authority.
Customer Service
●
Repairs must be carried out by authorized specialists, thus ensuring electrical
safety.
●
Please contact with the service agent or a suitably qualified electrician.
●
Improper repairs could lead to danger to the user.
●
This warranty does not cover damage of failure which results from alteration,
accident, misuse, abuse, neglect, commercial use or improper maintenance.
●
In line with our policy of continuous product development we reserve the right
to change the product and documentation specifications without notice.
