The MATRIX PV009-200KB can also be controlled by an app that has been
downloaded to a tablet or smart-phone via a Bludetooth connection.
This app is available in the app store for Apple devices, pls search “Sunkare” and
download it. It is also available for Android in the Google Play Store. In order to be
able to use the app, turn on the bluetooth connection on your smartphone or tablet and
select Sunkare.
With the app, you can:
●
On/Off
●
Variable heat output from 25% to 100%
●
Timer with auto shut off
●
Password connection to heaters
●
Individual heater identification and control
Shock safeguard
The
MATRIX PV009-200KB
has the option of s shock safeguard that switches the
device off if it is shocked in any way. The shock safeguard can be activated with the
app and the sensitivity can then be set on a sliding scale. When the device is
supplied from the factory, the shock safeguard is off. Once the shock safeguard has
been activated, it can be operated via the remote control or manually. If the shock
safeguard has switched the device off, the red light at the reception point will blink.
Check to ensure that the device has not been damaged. If everything is ok, you can
restart the device by:
1.
Using the remote control to switch the device off and then on again.
2.
Switching it off and on again using the switch, and then selecting the desired
output using the reset button (remote control)
3.
Switching the device off and on again with the app.
- Open the APP store or Google Play on your device.
- Download the Sunkare APP:
- Bluetooth should be switched on before using this APP.
- Switch on the heater by using the main switch on the side of unit.
- Then open the “Sunkare” APP on your device.
- For connecting the heater with the APP, please follow the steps below:
(Figure 1) (Figure 2)
- Select the button in the below left corner of the home screen. (Figure 1)
- To Switch on the heater, please select the bar. (Figure 2)
- For the first time use of the heater, a password will be asked. The password is
automatically set to: 12345678. If the password is not accepted, please press and hold
the reset button on the side of the unit for 10 second. You can retry to fill in the
password.
-The password can be changed, select the button in the below right corner of the
home screen (Figure 3), and select “Password” to change the password. (Figure 4)
(Figure 3)
(Figure 4)
- The heater is connected and ready for use.
- To set the heat capacity, please select the small sun-icon below. Thereafter, below
screen of Fig.5 will be showed.
- Select the heater and using the circle bar on the top of the screen you are able to set
the variable warm. (Fig. 6)
(Figure 5)
(Figure 6)
