19
- Lock the shaft of the brush cutter
at the intended place with a
screwdriver or with the provided
Allen key (21).
- Turn the hexagon nut anti-
clockwise onto the shaft and
tighten with the spark plug wrench
(22).
CAUTION: Left-hand thread
Connecting the drive unit and
assembly:
Insert the ends of the assemblies
to be connected. Make sure that
the locking pin (26) locks in place.
Check pulling apart on a trial and
error basis. Fold down the cover
(26a) and secure the assemblies by
tightening the locking screw (12).
Release of drive unit and
assembly:
Loosen the locking screw (12).
The cover (26a) jumps back.
Hold the locking pin (26) pressed
underneath the cover and loosen
the modules by carefully pulling
them apart simultaneously.
Caution!
The knife may only
be ground by a qualified and
experienced specialist.
Incorrectly ground blades increase
the risk of breakage and cracking.
Teil B
Teil C
12
26a
26
26
26a
12
a
