4
5
•
Ambient temperature 10°C - 60°C, humidity 30% - 80%, Ideal humidity 55%
•
Dust - Due to the static adherence of the film, you should keep the environment clean, a
dust cover is provided with the machine
•
Please do not keep the machines in direct sunlight
•
Please do not keep the machine in or around dusty areas
•
Enough space should be kept around the machine to ensure the secure and effective ap-
plication. The minimum holding areas are 2.5m x 3m
Environmental Requirements
Safety Instructions
The Control Panel
•
Please ensure that the voltages of power supply you are using match with rated working
voltages before operating the machine
•
The power supply should be close to the machine for convenient use
•
The power supply should provide reliable protective earthing connection
•
This machine must be earthed reliably so as to ensure the safety of the machine during
operation
•
Only the operators of this machine should operate the electric or motion components/
controls
•
Please don’t use damaged wires or sockets
•
Please keep children away from touching and operating this machine
•
Please do not spray water or other liquid on the machine otherwise electric shock or
machine faults could occur
•
Please do not replace power cord or plugs yourself, do not put heavy objects on the
power lines as this may cause electric shocks
•
During use please take care that no clothes, neckties, hair, necklaces etc are near the
machine otherwise injuries could occur
•
Please don’t put burrs, sharp blades or over thick rigid materials into the two rubber cov-
ered rollers (for example, tools, rulers and knives etc.)
•
Don’t cut adhesive films directly on the surfaces of the rubber covered rollers to avoid
damage
•
Please shut down this machine after laminating to avoid misuse of the machine
•
At the end of the working day always gape the rollers to ensure no flat spots or distor-
tions occur
•
When you need to move this machine, please shut down the power switch and pull out
the plugs
•
Please be aware of the location of the wheels during moving or operating this machine
to avoid foot injuries
•
Always ensure the machine is positioned on a flat and level floor
•
Please shut off the power supply (pull out the power plug) when the machine isn’t going
to be used for long periods of time.
Display screen
Function key
Memory keys
Temperature
Setting
Screen
brightness
adjustment
Speed
setting
dial
Stop key
Reverse
rotation key
Crawl Key*
Forward drive
Anti-curl setting
Fine tune key for
cutting position
Paper
length
setting
*Functions with foot pedal only
Running
speed
The Display Screen
Sheet
length
Sheet
splitting
adjustment
Anti-curl setting (0-6)
Actual temperature
Screen brightness
Memory
Set temperature
Sheet counter
